Skip to main content
CutFileVault
BrowseCreate with AIAIStudioFree filesPNG to SVGPricingBlogHelp

CutFileVault

Hand-curated SVG cut files for crafters. Instant digital download, commercial use included, nothing ever ships.

Questions? hello@cutfilevault.com

Shop

  • Browse all
  • Create with AI
  • Design studio
  • Layered SVG maker
  • Layered DXF maker
  • AI SVG editor
  • Free files
  • Sublimation designs
  • PNG to SVG converter
  • SVG file checker
  • Credit packs

Read

  • Blog
  • Tutorials
  • Project ideas
  • Seasonal
  • Craft calendar
  • Free SVG audit

Help

  • Help & FAQs
  • About
  • Refunds & returns
  • Shipping
  • License
  • Terms
  • Privacy

© 2026 CutFileVault. All rights reserved.

Layered DXF maker for lasers

Build a laser file where each color is its own layer. Describe a piece, give it a color, add the next, and download a DXF and an SVG you can set up as cut, score and engrave.

Open the studio
On the canvasLAYER_1LAYER_2LAYER_3
Three colors on the canvas become LAYER_1, LAYER_2 and LAYER_3 in the DXF, back to front. Each one takes its own setting in your laser software.

What comes out

  • One layer for each color

    The DXF has a named layer per color, LAYER_1 upward, and the SVG has a matching group. LightBurn puts each on its own layer in the Cuts panel, ready for its own speed, power and mode.

  • No hidden geometry

    A laser follows every line it is given. Pieces of one color that touch are welded, and a piece in front of another color is cut out of it, so there are no lines under other shapes.

  • Closed outlines

    Every shape is a closed outline traced from the canvas. It fills for engraving and follows cleanly for cutting.

  • You decide what each color does

    Give the outline one color and the detail another, then make one a cut and the other an engrave. Change a piece's color on the canvas and it moves to that layer in the file.

How to make a layered DXF for a laser cutter

  1. 1

    Describe the first piece

    Type what you want and its color, like a stag head in black. One message draws one piece in one color.

  2. 2

    Use a color for each operation

    Add the next piece in a different color: a round frame in red for the cut, lettering in blue for the engrave. Color is how the file tells your laser software which shapes belong together.

  3. 3

    Arrange it

    Drag, resize and stack the pieces. If one is wrong, select it and say what to change, and only that piece is redrawn. Everything else stays where it is.

  4. 4

    Download and assign settings

    Download the DXF or the SVG and import it. Each color arrives as its own layer. Set the speed, power and mode for each one and scale the job to your material.

Start with a first piece

Each of these opens the studio with the words typed in. Nothing is sent until you press the button.

  • A stag head with antlers, front view, in black
  • A round wreath of oak leaves in black
  • A topographic mountain outline for a coaster in black
  • A honeycomb pattern panel in black

Laser files, frequently asked

How do the layers show up in LightBurn?
Each color in the design is written to its own DXF layer with its own DXF color, and LightBurn sorts shapes into its layers by color on import. So each color from the canvas lands on a separate line in the Cuts / Layers panel, where you set it to line, fill or both.
Are the DXF layer colors the colors I picked?
No. DXF layers use a fixed color index, so the layers are colored red, green, blue, yellow and magenta in that order, whatever you picked on the canvas. The SVG keeps your exact colors. A design with more than five colors repeats the DXF colors, so use the SVG for those.
Are these single-line paths for scoring?
No. Every shape is the outline of a filled area. A thin line in the drawing is a thin shape with two sides, not one stroke down the middle. That is right for cutting and for fill engraving. If you need a true single-line score, draw that line in your laser software.
Which laser software can open the files?
LightBurn and xTool Creative Space open both the DXF and the SVG. The Glowforge app opens the SVG. Any CAD or CAM program that reads DXF will see the named layers.
What size is the file?
It is a vector, so scale it to your material in the laser software and nothing is lost. Set the final width there rather than trusting the size it imports at.
Can I add engraved text?
Yes. Words are set from a real font and arrive as their own piece, so you can give them their own color and engrave them while the rest is cut.
What does it cost?
Trying it is free and needs no account: the first 6 drawings cost nothing. The files for a design made that way are $1, paid on the page, still with no account. With an account, one credit covers 6 drawings and the downloads are included. Moving, resizing, recoloring, stacking and lettering never cost anything.

The same design studio is behind these pages too: Layered SVG maker, AI SVG editor. Want one finished design from one sentence? Use the AI cut file generator. Have a picture already? The PNG to SVG converter traces it for free.